OSHA footwear requirements and ANSI, ASTM standard for safety shoes

When discussing OSHA footwear requirements, we often think of OSHA, ANSI, and ASTM right away. But, people are unsure about the distinctions among these three, making it difficult to decide on the right safety shoes.

With a multitude of grades and standards for safety shoes, it can be challenging to know exactly which one we should wear. That’s exactly why understanding the various ratings and standards applicable to safety footwear is crucial. This article explains the relationship and differences between OSHA, ANSI, and ASTM standards.

In this article, we will analyze OSHA footwear requirements and ANSI,ASTM standard for safety shoes one by one, as well as the relationship between them

What is OSHA standard for safety shoes?

OSHA is the Occupational Safety and Health Administration,According to OSHA footwear requirements 29 CFR 1910.132 Employers must give employees PPE if a hazard assessment shows they need it or if there are expected hazards.

OSHA footwear requirements

1910.136 requires that OSHA footwear must meet the American Society for Testing and Materials (ASTM) F2412-05 Standard Test Method for Foot Protection, F2413-05 Standard Specification for Performance Requirements for Protective Footwear, and the American National Standards Institute (ANSI) American National Standard for Personal Protection – Protective Footwear (ANSI Z41-1999 and Z41-1991) performance standards.

OSHA foot protection requirement

1910.136(a) states: Each affected employee works in an area where there is a risk of foot injury from falling or rolling objects or objects puncturing the soles of shoes, and when working in a location where the employee’s feet are exposed to electrical hazards , protective shoes should be worn.

Appendix B to PartⅠ identifies the following occupations for which foot protection should be considered on a regular basis: “Shipping and receiving clerks, inventory clerks, carpenters, electricians, machinists, machinists and repairmen, plumbers, assemblers, drywall installers and foamers, packers, packers, craters, punch and press operators, sawyers, welders, laborers, freight handlers, gardeners and groundskeepers, wood cutters and loggers, inventory handlers and warehouses Worker.

OSHA footwear requirements released an updated version of its PPE standards on September 9, 2009. The final rule became effective in October 2009. OSHA updated its standards for various industries such as general industry, shipyard employment, marine terminals, and longshoring. The updates include rules for eye and face protection, as well as head and foot protection.

The OSHA footwear requirements changes were made to the rules to acknowledge newer versions of the national standards. It allows employers to use PPE constructed in accordance with any of three national consensus standards.

Does OSHA require safety shoes?

OSHA makes employers responsible for assessing workplace hazards and choosing the right protective footwear for their employees through regulations. OSHA encourage employers to go above and beyond these requirements to ensure employee safety. To protect them from dangers such as falling objects, electrical hazards, slips, and falls.

What is ANSI standard for safety shoes?

ANSI is the standard for protective footwear by the American National Standards Institute (ANSI Z41-1999 and Z41-1991).

Safety shoes have long used safety labels from the American National Standards Institute (ANSI) and ASTM. The two sets of rules are essentially the same, so OSHA removed all references to ANSI Z41-1999 on March 1, 2005. Reference, hereafter only reference to ASTM F2413.

The current ANSI standard for safety footwear is ASTM F2413. This standard covers the minimum requirements for safety footwear.

The current ANSI standard for safety footwear is ASTM F2413. This standard covers the minimum requirements for safety footwear. Many companies and manufacturers still use outdated ANSI standards. One example is “ASTM F2413 (formerly ANSI Z41).” They rely on these standards to describe safety shoe features. However, from a user perspective, labels such as impact protection (Such as I/75), compression protection (Such as C/75), electrostatic dissipation (Such as SD 100), etc. must be the same for ASTM as they are for ANSI.

The American National Standards Institute (ANSI) sets standards for a variety of products, including safety shoes. ANSI’s safety shoe standard is the ASTM F2413 standard. The standard covers minimum requirements for safety footwear, including impact and compression resistance, metatarsal protection, and protection against electrical hazards.

What is ANSI Z41 standard?

The ANSI Z41 requirements performance measurement and testing method for protective footwear. The latest update of ANSI Z41-1999 requires suppliers and manufacturers of protective footwear to provide lab test results. This is to ensure that the footwear meets the standard.

Safety shoes must meet the requirements of ANSI Z41.1. This standard covers impact resistance and compression resistance for all types of footwear. You can meet more needs like protection from electricity, conductive currents, punctures, and penetrations.

Protective shoes must meet ANSI standards for toe protection before meeting other requirements. ANSI-approved work boots may not protect against metatarsal, electric shock, or penetration dangers. All shoes made to ANSI rules will have a label showing which part of the standard they follow.

ANSI standards have a coding system for manufacturers to identify which parts of the standard footwear follow. The ID number needs to be easily seen on one shoe of each pair of protective shoes.

What is ASTM standard for safety shoes?

ASTM is the American Society for Testing and Materials, which sets standards for a variety of products, including safety shoes. The ASTM safety shoe standard is the ASTM F2412 standard. Tests check if shoes are safe for impact, metatarsal protection, pressure resistance, and other standards. The ASTM F2413 standard covers the level of protection provided by safety shoes as well as the labeling system used on the shoes themselves.

we’ll talk about OSHA, ANSI, and ASTM standards, and what they mean for our work boots.

While you may see some boots or shoes labeled as meeting “ASTM F2412 and ASTM F2413 standards.” You just need to make sure your shoes meet ASTM F2413 standards.

There have been many updates to their content over the years. In many cases, labeling systems will reference those years. You might come across different versions of the standard like ASTM F2413-05 (2005), ASTM F2413-11 (2011), ASTM F2413-18 (2018), etc. You can ignore these year marks; the core standards for safety shoe labeling and protection thresholds have not changed.

About the ASTM standard,What are the requirements for safety boots?

The ASTM F2413-18 Standard specifies the minimum requirements for protective shoes in terms of design, performance, testing, and classification. Footwear certified to comply with ASTM F2413-18 must first meet the requirements of impact resistance and compression resistance. It can meet the requirements of additional parts such as metatarsal protection, conductivity protection, electric shock protection, electrostatic dissipation protection, and puncture prevention protection.

Manufacturers must label all footwear according to ASTM specifications with specific parts of the standards they comply with. Each pair of shoes must have one shoe that is marked. The marking should be on the tongue, gusset plate, shoe system, or quarter lining.

The following is our tongue label example of ASTM F2413-18 marking:

This is our tongue label esample of ASTM F2413-18, H-tech safety footwear is a ASTM standard safety shoes manufacturer.

Line #4: ASTM F2413-18

This line shows that the protective footwear meets the requirements of ASTM F2413 issued in 2018.

Line #5: M /I/C EH PR:

This line identifies the gender [M (Male) or F (Female)], the impact resistance (I), and the compression resistance (C); The electrical insulation properties (EH) and puncture resistance (PR).

The new ASTM standards for footwear specify that it should meet the following requirements

impact resistance (I)

The ASTM F2413 guidelines explain three levels of safety toe protection: against impacts of 75, 50, and 30 feet-pounds.

Feet pounds are the force (in pounds) applied when an object falls from the height of one foot. This means that a pair of boots with a toe protection rating of 75 feet pounds can protect your toes from damage from a 75-pound object falling from a height of 1 foot (or a 150-pound object falling from a height of 6 inches, or a 37.5-pound object falling from a height of 2 feet, etc.). Most employers recommend wearing I/75 shoes.

compression resistance (C)

The ASTM F2413 compression resistance marks are C/75, C/50, or C/30. They protect against rolling objects weighing 2,500, 1,750, and 1,000 pounds.

Firstly,Safety footwear must meet minimum compression and impact performance standards,Upon this foundation, one might append:

OSHA Metatarsal requirement (Mt)

Metatarsal impact protection (Mt) reduces the chance of injury to the metatarsal bones at the top of the foot (75, 50, and 30 foot-pounds of protection),means metatarsal guards. Most employers recommending Mt/75 met guard boots. metatarsal guards OSHA Mt/75 boots offer protection from a 75-pound object falling from a height of 1 foot. The key difference between ASTM F2413 and ASTM F2413-18 is this additional of metatarsal protection requirements.

Conductive properties (Cd)

Cd footwear protects against static electricity and reduces the risk of explosions or fires caused by volatile chemicals. The footwear must facilitate electrical conductivity and the transfer of static electricity build-up from the body to the ground. The electrical resistance must range between 0 Ω and 500,000 Ω.

Electric hazard protection (EH)

Electric hazard protection (EH) to protect the wearer when accidental contact is made by stepping on live electrical wire (capable of withstanding the application of 18,000 volts at 60 hertz for one minute with no current flow or leakage current more than one milliampere, under dry conditions).

Static Dissipation Protection (SD or ESD)

Static Dissipation Protection (SD or ESD) footwear conducts static electricity to the (grounded) floor to prevent fires explosions or accidents caused by static discharge.

It comes in three protective ranges: SD 100, SD 35, and SD 10, whose soles offer resistance levels up to 100 megaohms, 35 megaohms, and 10 megaohms, respectively. The higher the resistance level, the easier it is for static electricity to dissipate into the floor.

Puncture-resistant (PR)

Puncture-resistant (PR) shoes ensure protection against damage to such materials using a non-removable metal or non-metallic plate placed between the insole and outsole of the shoe.

Devices constructed of metal must pass the ASTM B117 Practice for Operating Salt Spray (Fog Apparatus) corrosion resistance testing. The device must show no sign of corrosion after being exposed to a five percent salt solution for 24 hours. The puncture-resistant footwear must show no signs of cracking after being subjected to 1.5 million flexes and have a minimum puncture resistance of 270 pounds.

Chainsaw Cut Resistant (CS)

Chainsaw cut resistant (CS) Shoes are designed to provide the wearer with foot protection while operating a chainsaw. Its purpose is to protect the area of the foot between the toes and calf. The shoe must meet ASTM F1818 Specification for Foot Protection for Chainsaw Users.

Dielectric insulating (DI)

“Dielectric insulating (DI) shoes add extra insulation against accidental touches to live conductors, equipment, or circuits. They must conform to ASTM F1117’s minimum insulation performance standards and undergo testing as per ASTM F1116 for their dielectric strength.”


To be a safety shoes manufacturer whom up to the OSHA footwear requirements, We deeply understand the osha regulations on footwear. In summation. OSHA footwear requirements is footwear policy in the workplace; ASTM F2413 is astm standards for footwear.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top